Correct Weight Distribution
-
- Posts: 947
- Joined: Thu Nov 11, 2010 9:13 pm
- Location: Melbourne VIC
Correct Weight Distribution
Postby Krank » Fri Feb 08, 2013 4:03 am
how do you actually measure this weight portion when on bike?
krank
-
- Posts: 9810
- Joined: Tue Dec 01, 2009 11:48 am
Re: Correct Weight Distribution
Postby human909 » Fri Feb 08, 2013 4:33 am
- greyhoundtom
- Posts: 3023
- Joined: Sun May 31, 2009 6:28 am
- Location: Wherever the sun is shining
- Contact:
Re: Correct Weight Distribution
Postby greyhoundtom » Fri Feb 08, 2013 5:55 am
If you wanted to check this it would mean two sets of scales......one wheel on each, and with you sitting on the bike in your preferred riding position.Krank wrote:i read that your riding position should put 60% of your weight on the back wheel and 40% on the front. This is important for bike control as well as comfort.
how do you actually measure this weight portion when on bike?
krank
-
- Posts: 587
- Joined: Fri Jun 10, 2011 8:37 pm
- Location: Adelaide
- Contact:
Re: Correct Weight Distribution
Postby TDC » Fri Feb 08, 2013 6:54 am
First weigh yourself holding the bike, then position the front wheel on the scales and the rear wheel on the phone book. Get on the bike into your riding position and the read the weight on the scales. Use the results to calculate the percentages.
OP does not mention "comfort bike".human909 wrote:Comfort? Most comfort bikes have a much higher percentage weight on the rear.
-
- Posts: 947
- Joined: Thu Nov 11, 2010 9:13 pm
- Location: Melbourne VIC
Re: Correct Weight Distribution
Postby Krank » Fri Feb 08, 2013 7:40 am
if you measure your own weight distribution, what results do u have?
krnak
- DoogleDave
- Posts: 519
- Joined: Mon Mar 12, 2012 7:56 pm
- Location: Taylors Hill, Victoria
Re: Correct Weight Distribution
Postby DoogleDave » Fri Feb 08, 2013 7:49 am
Would you also need to factor in momentum and the forces you apply to the bars and pedals as they push forward on the bike as you pedal (with effort) - as sitting statically on the scales may not prove accurate for this - as this is how the bike is weighted when riding (which is what matters), not when you're sitting on the bike leaning against a wall.
Also, how hard and fast is the 60/40 ratio? what if it's 57/43 or 62/38...is it going to make that much difference or is the 60/40 rule just another generalisation?
Interesting question though....
Dave
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Re: Correct Weight Distribution
Postby toolonglegs » Fri Feb 08, 2013 7:51 am
Personally my bike is set up per Steve Hogg many many moons ago in regards to saddle position... but my bars sit high due to an enormous head tube, when I train I do so mainly on the hoods, when I race I never leave the drops... so huge change in body position... but where does knowing the actual break down % make any difference?.
You want to go fast get low... and if you are like me you will have to put up with a bit of discomfort in certain parts to get the aero benefit ( hands, upper arms, hamstrings for me ). Just up to you personally to decide where to compromise.
- barefoot
- Posts: 1203
- Joined: Tue Jan 29, 2008 11:05 am
- Location: Ballarat
Re: Correct Weight Distribution
Postby barefoot » Fri Feb 08, 2013 9:16 am
As a rule of thumb, I guess you'll find that a generic rider on a generic road bike will have somewhere close to 60:40 weight distribution. I wouldn't read any more into the numbers than that.
tim
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Correct Weight Distribution
Postby il padrone » Fri Feb 08, 2013 9:20 am
"An unjustified and unethical imposition on a healthy activity."
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Correct Weight Distribution
Postby sogood » Fri Feb 08, 2013 9:31 am
RK wrote:And that is Wikipedia - I can write my own definition.
- Mulger bill
- Super Mod
- Posts: 29060
- Joined: Sun Sep 24, 2006 2:41 pm
- Location: Sunbury Vic
Re: Correct Weight Distribution
Postby Mulger bill » Fri Feb 08, 2013 2:47 pm
Longer stays will shift the CG forward by a fair margin (dependant on the length of course). BMX and Trials bikes commonly run the shortest stays possible to make it easier to lift the front.barefoot wrote:If I have two custom bike frames built, identical front end geometry, built up identical stem, bars, saddle etc., but one frame has long chainstays and the other has short chainstays... my weight distribution is going to be very different on them even though I'm fitted in exactly the same position.
As a rule of thumb, I guess you'll find that a generic rider on a generic road bike will have somewhere close to 60:40 weight distribution. I wouldn't read any more into the numbers than that.
tim
London Boy 29/12/2011
-
- Posts: 727
- Joined: Fri Apr 03, 2009 8:33 pm
Re: Correct Weight Distribution
Postby ausrandoman » Fri Feb 08, 2013 3:59 pm
Return to “General Cycling Discussion”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.