consists of an old gate cut up to form the frame, 2 front forks from 16" bikes i was scrapping, some colonial fence palings and some screws. i also ordered a eyelet style toe rod end from ebay which will be my hitch point. so all i need to buy still is a long bolt which the tie rod will go onto and make the draw bar and hitch bracket off the back of the bike. im also picking up a section of c-channel to hold the bike in place while being towed. (if you buy actual c-channel it costs about $30/m but if you buy fence post channeling its $12 for 3m) it should be all finished over the weekend apart from the tie rod which wont be here until monday/tuesday.








