Wheelbuilding with Farsport carbon 29er clinchers

Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Tue Aug 28, 2012 11:39 am

Finally. :roll:

Have put in the order for a pair of Farsports 29er rims (25mm deep x 24mm wide) to built up as a disc set for the Kona Honky Inc. They are slightly wider & deeper rims when compared to those that Andrew Burns sourced from FS a while ago as a wheelset.

I'll be using bladed spokes, alloy nipples and my Circus Monkey Hubs (the rear is the CX specific new one that is 130mm OLN), and should be spot on 1,400g complete. It will be a saving of near as damnit to 1,000g over the existing std wheelset on the Kona.

Might notice a teeensy difference. :mrgreen:

Will post some pics and details when the rims and other parts arrive.

Standby to standby :wink:
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

by BNA » Wed Aug 29, 2012 8:39 pm

BNA
 

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby RideLikeTheWind » Wed Aug 29, 2012 8:39 pm

I'm keen to see your results - have been thinking about giving wheel building a go...

Post some pics up when you get the chance!

Cheers,

Joe
Image
User avatar
RideLikeTheWind
 
Posts: 484
Joined: Wed Oct 10, 2007 4:57 pm
Location: Glenmore Park

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby Crittski » Wed Aug 29, 2012 9:33 pm

RideLikeTheWind wrote:I'm keen to see your results - have been thinking about giving wheel building a go...


Me too, good luck Michael!
Santa Cruz Blur TRc XTR
Volagi Liscio Ultegra
Crittski
 
Posts: 391
Joined: Sat Oct 02, 2010 7:06 am

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Thu Aug 30, 2012 8:43 am

So far so good.

Pics from FarSports shows the pair of rims are spot on 740g, so that is a good start.

Please be advised of your article delivery status.
Article Number EE5667075xxCN
Consignment Number
Total Articles 1
Date/Time 29.08.12 14:12:00
Current Status Despatched
Location XIAMEN EMS , China


The rims are on their way.

Spokes/nipples will be ordered next week :D
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Mon Sep 03, 2012 2:11 pm

Rims arrived today at work. Initial inspections reveals all is good so far, but will have a clower look tonight at home.

Spokes (black bladed) and nipples (red alloy to match hubs) were ordered this morning.

Hubs are ready to rock and roll, and I'm ready to build !!!
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Wed Sep 05, 2012 6:03 pm

The rims arrived the other day and they look good.

Farsports and i are having an amicable discussion re the version of rims sent (they recently updated their mould and i got the old spec rather than the new). This meant a potential issue with the spokes, but we are working through that.

Here are some pics of the rim (32 hole) - Rim spec is 24mm wide x 23mm deep, 700C, and weight is 375g (spec is 370 +/- 10g). The 28 hole was 372g. Finish on both is UD Matte.

Image

Image

Image

Whilst the surface finish (especially in the last pic) looks rough, it is as smooth as.

The holes are well formed and round, and no apparent issues so far.

Here are the hubs

Rear
Image

Front
Image

Stay tuned for more !!!
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby Crittski » Sat Sep 08, 2012 4:01 pm

Cool! Looks like a fun project!
Santa Cruz Blur TRc XTR
Volagi Liscio Ultegra
Crittski
 
Posts: 391
Joined: Sat Oct 02, 2010 7:06 am

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Sat Sep 08, 2012 8:48 pm

Spokes and nipples are on their way.

Overall weight will be a smidge above the 1,400g for a full wheelset.

Not bad considering the 28/32 hole combo !!!

It wont be a quick process, but it will happen :D
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Tue Sep 25, 2012 3:21 pm

Got all the bits and pieces now, but due to a change in plans, I'm selling the CM hubs, waiting to get a new frame (liklely the Volagi Lisacio) and build these up with a set of 135mm hubs, as that is the new spacing.

BUT ..., if anyone wants these hubs, spokes and/or rims, or even as a wheelset, let me know.

Cheers

Michael B
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Tue Nov 06, 2012 7:01 pm

Finally will have a crack at building the rear tomorrow.

I have a new HDW3-R rear hub (135mm spacing) to suit the new frame (Volagi Liscio v2). I'm waiting on the front (oh what a sorry tale that is :? ), but anyway, lets move on.

Based on actual components weights on my scales, the rear should be 777g (not bad for a 23mm wide carbon clincher with MTB disc hub and 32 spokes). Front should be 648g for same setup but 28 spokes. That makes the overall wheelset 1,425g, for a total of under A$600.

Some pics to come over the next few days.

Front hub should arrive soon, and that build will then be shown as well :D

Standby to standby, I finally get to crank my new Wrench Force wheel truing stand into action :mrgreen:
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby Crittski » Tue Nov 06, 2012 7:34 pm

Cool, my plans to upgrade frame, and wheels to liscio v2.0+enve+sapim+CK hubs may be accelerating...
Santa Cruz Blur TRc XTR
Volagi Liscio Ultegra
Crittski
 
Posts: 391
Joined: Sat Oct 02, 2010 7:06 am

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Wed Nov 07, 2012 6:59 am

Let the build begin :mrgreen:

1st key ingredient - HDW3-R hub at a noice 226g, and then the rim (375g), spokes, velox rim tape and shiny red alloy nipples

Image
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby AndrewBurns » Wed Nov 07, 2012 7:25 am

I should have a go a building my own wheels at some point, watching with great interest.

As a side note my farsports 29er disc wheels are still going very strong on the commuter, I've taken some pretty hefty thumps with them including an un-planned jump off a kerb with a loaded pannier on Monday and they just keep taking it no problems. It was a complete pain to get the tyres on when they were new though, I thought I was going to break the rim with my tyre levers!
Image
AndrewBurns
 
Posts: 996
Joined: Sun Oct 09, 2011 1:36 pm

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Wed Nov 07, 2012 10:52 am

Rear wheel is laced and started tensioning.

Have some tradies around at the moment, so full tensioning and trueing will be done later.

Some pics as teasers .......

Laced up and ready to tension

Image

light tension applied ready to true & fully tension

Image

775g !! Noice :D
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby Crawf » Wed Nov 07, 2012 1:04 pm

Noice!
Keen to see tyre profile and how fitting will go...
Crawf
 
Posts: 1686
Joined: Wed Jan 09, 2008 8:20 pm

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Tue Nov 13, 2012 10:55 am

Front hub arrived in todays post, so should have the front wheel done soon too.

Stay tuned 8)
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Fri Nov 16, 2012 10:17 am

Front wheel laced last night.

646g :D

Makes it 1,421g for the pair. Not bad considering the spoke count.

More pics to come
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby Crittski » Fri Nov 16, 2012 8:00 pm

Enve are currently testing their 29er rims with roadie tyres. I am considering getting some made up if I end up upgrading my frame...
Santa Cruz Blur TRc XTR
Volagi Liscio Ultegra
Crittski
 
Posts: 391
Joined: Sat Oct 02, 2010 7:06 am

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Wed Jan 02, 2013 2:37 pm

It has been a rather long drawn out process, but with house reno stuff taking priority, it just took a while.

Anyways, the rear wheel is now full tensioned and trued, and the front is 75% there.

There are going to be a few stinkers here soon, so that may be an opportunity to get the front finished, finally.

Then, all I need is the frame .... :roll: :cry:
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Wed Feb 13, 2013 10:53 am

Finally.


:roll:


Managed to get some time yesterday arvo, and the wheels are now finished and tyres mounted. Thye Ultremo ZX 25C's fit beautifully with no issues.

Some pics to come shortly
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia

Re: Wheelbuilding with Farsport carbon 29er clinchers

Postby MichaelB » Wed Feb 13, 2013 8:16 pm

Here are some pics.

Hopefully they show something interesting.

I'm really happy how they have turned out.

Image

Image

Image


Now, just to get the frame .....
User avatar
MichaelB
 
Posts: 6829
Joined: Tue Feb 20, 2007 8:29 am
Location: Adelaide, South Australia


Return to Generic Carbon

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Ebay Ebay AU

“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter

> FREE BNA Stickers
> BNA Cycling Kit