No pics for a while yet... but after looking at the cost of buying a decent road bike and then having to upgrade wheels etc. I have switched to a cunning plan.
Digging through the shed uncovered the early 80's Bennet Super Sport that belonged to my father (he put maybe 50km's on it) and then became mine for a few years of university. Unfortunately, in the meantime, something got dropped on the frame, bending a seat stay & dropout, and leaving a dent in the top tube.
Frame is currently being repaired, re-spaced, updated for bidon mounts and powder coated, Shimano 105 group set (EBay) should be here in a few more days, wheels are on order.
Going retro... sort of.
-
- Posts: 972
- Joined: Sun Jan 14, 2007 9:18 pm
- HappyHumber
- Posts: 5072
- Joined: Wed Nov 14, 2007 11:48 pm
- Location: Perth, (S.o.R.) W.A.
Postby HappyHumber » Tue Jun 24, 2008 11:10 am
sounds nice, Michael.
Hope you'll have before & after pics?
Kym
Hope you'll have before & after pics?
Kym
--
Hit me up via the BNA dm; I'll get an alert. If y'know, you know.
Hit me up via the BNA dm; I'll get an alert. If y'know, you know.
-
- Posts: 922
- Joined: Sat Aug 18, 2007 4:55 pm
- Location: SOR.perth.au
Postby cray- » Tue Jun 24, 2008 7:37 pm
Any idea what kind of reputation the Bennet's had/have? I'm pretty sure my old man has one out in the shed as well. Unfortunately that shed is in Victoria and I'm not [<===] so it'd have to have some serious street cred to warrant postage across the country for a freshen up. Good candidate for a fixed conversion perhaps?
-
- Posts: 972
- Joined: Sun Jan 14, 2007 9:18 pm
Postby MJF » Wed Jun 25, 2008 12:18 pm
Cheap & high-tensile, but a lugged frame and in my size. And a pretty bare frame as well, so a good starting point for mods as nothing needs removing. And I have the before photos, so now I have a good ISP again, I'll post them up when I have a second.
Bennett was owned by Hanimex and was the up-market end of the range. There's some info here. Certainly a cheap mass-produced frame, as the rear dropouts are just pressed steel. Weird part is that, in the last few weeks I've seen another couple (both large frames as well) around the shops being used as commuters.
Bennett was owned by Hanimex and was the up-market end of the range. There's some info here. Certainly a cheap mass-produced frame, as the rear dropouts are just pressed steel. Weird part is that, in the last few weeks I've seen another couple (both large frames as well) around the shops being used as commuters.
- LuckyPierre
- Posts: 1432
- Joined: Fri Jul 14, 2006 4:37 pm
- Location: Canberra, ACT
Postby LuckyPierre » Wed Jun 25, 2008 2:54 pm
I'm sure that you'll have fun with the Super Sport. From memory, there are / were some quite upmarket Bennets which were (I think) made in England. I remember half lusting after one in the early 80's because it was quite a bit better than my Apollo IV.
Litespeed Classic - 3Al/2.5V titanium tube set, Record 9-speed groupset, Open Corsa Evo CX
Alchemy Diablo - Columbus Zonal tubing, Ultegra 9-speed groupset, UltraGatorskins
Gitane Rocks T1 - U6 tubing, Deore/XT groupset, CrossMarks
Alchemy Diablo - Columbus Zonal tubing, Ultegra 9-speed groupset, UltraGatorskins
Gitane Rocks T1 - U6 tubing, Deore/XT groupset, CrossMarks
-
- Posts: 3540
- Joined: Sat Dec 08, 2007 10:12 am
- Location: 3166
Postby kukamunga » Wed Jun 25, 2008 4:58 pm
I had a nice looking metallic green Bennett 'mixte' style (or was it a ladies?) bike, which I can't remember whether I still have or whether it went at the recent swap meet (I'll have to check my mums' garage). Seemed to be mainly Japanese frame and components
-
- Posts: 972
- Joined: Sun Jan 14, 2007 9:18 pm
Postby MJF » Wed Jun 25, 2008 9:11 pm
The wheels turned up today. 32 spoke Deep-V's, with machined sidewalls this time, unlike the Deep-V's on the hybrid. But the front hub is very rough - might drop it back to the LBS tomorrow for a check up, as I suspect from the feel that it has insufficient/no grease in it. I rode today, so they stayed at work. And I just got an email from the EBay seller to say that the 105 group set had arrived at my mail box. Hmmm... if I take a backpack, can I fit it all in on my ride to work tomorrow?
Speaking of riding in - 8C for the ride in and 8C for the ride home... or -12 TD in Tuco-speak. The lack of sun for the ride home made it far worse - my toes were freezing.
Speaking of riding in - 8C for the ride in and 8C for the ride home... or -12 TD in Tuco-speak. The lack of sun for the ride home made it far worse - my toes were freezing.
- LuckyPierre
- Posts: 1432
- Joined: Fri Jul 14, 2006 4:37 pm
- Location: Canberra, ACT
Postby LuckyPierre » Wed Jun 25, 2008 10:22 pm
A groupset isn't very big - take your backpack! You might have to ditch some packaging, but the actual components don't take up much room.
Velocity use pretty good hubs, so anew one shouldn't be rough. Don't even ride it take it back and get it sorted.
Velocity use pretty good hubs, so anew one shouldn't be rough. Don't even ride it take it back and get it sorted.
Litespeed Classic - 3Al/2.5V titanium tube set, Record 9-speed groupset, Open Corsa Evo CX
Alchemy Diablo - Columbus Zonal tubing, Ultegra 9-speed groupset, UltraGatorskins
Gitane Rocks T1 - U6 tubing, Deore/XT groupset, CrossMarks
Alchemy Diablo - Columbus Zonal tubing, Ultegra 9-speed groupset, UltraGatorskins
Gitane Rocks T1 - U6 tubing, Deore/XT groupset, CrossMarks
-
- Posts: 972
- Joined: Sun Jan 14, 2007 9:18 pm
Postby MJF » Thu Jun 26, 2008 10:52 pm
Groupset arrived in a largish box, but luckily fitted into my backpack. Looks good, except 'scratch on left STI shifter' turned out to be 'road rash from contact with ground'. There were lots of photos with the listing, but not of that side of the shifter for some reason.... Can't complain too much - came with all the documentation, barrel adjusters and a set of those frame protection stickers.
I'm driving tomorrow (left knee playing up again), so will bring all the bits home... after I get that wheel checked out.
I'm driving tomorrow (left knee playing up again), so will bring all the bits home... after I get that wheel checked out.
- HappyHumber
- Posts: 5072
- Joined: Wed Nov 14, 2007 11:48 pm
- Location: Perth, (S.o.R.) W.A.
Postby HappyHumber » Thu Jun 26, 2008 11:08 pm
I'd personally knock the seller down at least a bit in the anonymous part of their feedback rating for that. For all the good it does, anyway...MJF wrote:There were lots of photos with the listing, but not of that side of the shifter for some reason....
I similarly sold a pair of black 105 brifters about 18 months ago to some guy in the US. Likewise, mine had a 'graze' from a small bingle. I described it and was sure to detail that amongst the photos. The seller was happy with his purchase....
--
Hit me up via the BNA dm; I'll get an alert. If y'know, you know.
Hit me up via the BNA dm; I'll get an alert. If y'know, you know.
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.