eBay prices on the rise, good time to sell old junk?

[rkelsen]

1st photo, Bianchi, or at least the rear half of one.
http://www.ebay.com.au/itm/USED-VINTAGE ... 460df2de91

If the top half of its fork [visible in photo #2] is anything to go by, then it'll be a net liability.

[grantw]

1st photo, Bianchi, or at least the rear half of one.
http://www.ebay.com.au/itm/USED-VINTAGE ... 460df2de91

Looks like its fork in the third photo

Edit: didn't read over the page

[QuangVuong]

Fork is in third and second. Looks like you only get the rear triangle.

[ldrcycles]

Nice to see some people have dreams

A Pro Tour by the looks of it, I had one of those for a while, it had full GPX. Not a bad bike.

[LG]

For a taller fella in Sydney, this looks like the real deal http://www.ebay.com.au/itm/380608575128 ... 1423.l2649 Obviously had a hard life though.

[xerlex]

For a taller fella in Sydney, this looks like the real deal http://www.ebay.com.au/itm/380608575128 ... 1423.l2649 Obviously had a hard life though.

That's a whole lot of drive side photos.

[LugNut]

For a taller fella in Sydney, this looks like the real deal http://www.ebay.com.au/itm/380608575128 ... 1423.l2649 Obviously had a hard life though.

Gee that is nice. That is very nice. ...
There's no way I'd get it to Melbourne though. I think I'll move to Sydney for a whils just for the old bikes that pop up on eBay, everyone seems to have a high end racer parked in the shed. All I ever see in Melbourne is literally thousands of Hillman's and a few Repco Travellers.

[QuangVuong]

Whats it supposed to be? It looks huge though, prob 65cm +.

[LG]

No idea what it is, but looks like it's running singles on quality high flange hubs, brooks professional, record seatpost (or zeus copy ), stronglight cranks, 1st generation dura ace bar end shifters and probably black Dura Ace brakes & headset, and I reckon it might be suntour superbe FD with the clamp pivot as it is. Size, maybe more 60-62cm. Downside it it's been left out in the weather for a while.

[familyguy]

Whats it supposed to be? It looks huge though, prob 65cm +.

Nah, more like 62/63 I'd bet. Big, no doubt. Will be watching.

Jim

[Dan]

Lugged steel Giant in Narnagba (its where you get to once you go through the wardrobe in Narangba) - probably a touch overpriced to start with but I'd pay $90 for it...

[Rob74]

A bit of Variety
Repco MX?
The price of seized components/rust is up
Peugeot Ventoux (PH501) Reyonlds 501
It says Victory Tria
Small Apollo…maybe a ?IV?
Mongoose Supergoose…Hmmm…"a new decal set has been fitted"…they look like Skyway MrkII Tuffs…. didn't think they came out until circa 1983 ish?
gitane

Rob

[ldrcycles]

The price of seized components/rust is up

Rob

The description for this one needs to be edited a little, apparently the "button tube has been welded. It is rare to find a bike of this vintage". Should read, "It is rare to find a bike of this vintage with a down tube that has snapped and then been stick welded back together" .

[munga]

A bit of Variety
Repco MX?
Rob

my first ever bike <3

[singlespeedscott]

What's going on with this numpty's position? Nice bike. Setup is abhorrent.

Item no. 181111708038

[munga]

impressive.
i'm visualising a bmx rider.

[Sd]

Lugged steel Giant in Narnagba (its where you get to once you go through the wardrobe in Narangba) - probably a touch overpriced to start with but I'd pay $90 for it...

Dude only wants $110 check the gumtrees...

[cotterpin]

Nice old 60's track frame for the HILLMAN fans.

[frailer5]

Lugged steel Giant in Narnagba (its where you get to once you go through the wardrobe in Narangba) - probably a touch overpriced to start with but I'd pay $90 for it...

Dude only wants $110 check the gumtrees...

Had one a couple of years back when I decided to get back on (retro) roads. Nice enough bike, (CroMoly, but not butted, AFAIK). Pleasant ride, unicrown fork. But yeah, $90 would be the limit.

***********************


Also, anyone know whether this Centurion LeMans is the earlier Hi Tensile tubed one or the later Tange-tubed. Can't see a sticker. Shall ask seller, but may not get the answer I want.

[ldrcycles]

Lugged steel Giant in Narnagba (its where you get to once you go through the wardrobe in Narangba) - probably a touch overpriced to start with but I'd pay $90 for it...

Had one of those pass through my shed a year or two ago, not too bad, wasn't my size though.

[Rob74]

10 photos to celebrate a DUNGA…and they fail to show any key features
Big framed DUNGA with "Bonus Bell"
How ordinary would this thing be to ride?…
Buy a DUNGA then try and sell it for more?…
Assorted bottom feeders

*****************
Fugly…SL Tube set
If only...don't see these in Australia?
New seat for the Eric Hendren below?
Eric Hendren - Reynolds 653
Gazelle….tempting ?
Get your Popcorn…..

One for MUNGA

Rob

[Dan]

The Hendren belongs to xcx - got zero love in the marketplace.

[munga]

that chas roberts is quite nice.

[Crowz]

Me likey. One for the big boys.

[singlespeedscott]

Me likey. One for the big boys.

Man that's nice.

I like how all the old Pommie frames come in real sizes. Most of the Australian stuff is usually made for midgets. i.e. 22"

It's hard to find a 24" frame here. Especially if you want to ride it and have the right aesthetics and not ride with bandy legs.

A fistfull of post is were it's at.