Hilarious.Comedian wrote:Two words for you
DROP BEARS.
How bright is to bright?
- ColinOldnCranky
- Posts: 6734
- Joined: Fri Feb 27, 2009 4:58 pm
Re: How bright is to bright?
Postby ColinOldnCranky » Mon Apr 01, 2013 2:41 pm
- Lukeyboy
- Posts: 3621
- Joined: Tue May 29, 2012 2:38 am
Re: How bright is to bright?
Postby Lukeyboy » Mon Apr 01, 2013 2:41 pm
I have the MaxxD Mk4 which is claimed to be 1285 lumens and I constantly have it at full output in the dark of night while zipping around at 30-40kph... by the dark of night I usually mean this.
It picks up all the stones/sticks/glass on the ground, I can see all the toads that have migrated onto the pathway, I can see the eyes of animals off the side of the pathway, peds in the distance, dirt/sand on the ground, pick up fallen trees which had blocked the entire pathway (has happened to me twice) along with many other uses. There are times where I wish it was brighter just for those reasons. When I'm on the road i'll have them on high beam so merging traffic can see me coming. If there are cars coming towards me or traffic about to merge I just quickly press the button for the light on my handlebar and the bightness changes or flash mode will engage. I had some cheapo light that did light up the pathway and didn't blind riders coming towards me but as soon as some speed picked up or it got really dark (little ambient light) it was just useless as a pouring a bottle of water into the ocean while yelling "I'M FLOODING THE PLANET!!!".
Just so people know I'm not on the roads at 6-7pm riding. I'm talking more of 9pm-4.30am where there is little or no traffic around or on bikepaths with no lighting for up to 6km at a time. There has been times where I have done laps of Deagon/Sandgate-Nundha crit circuit and I haven't seen a single person, jogger, other cyclist or moving car (besides traffic on the Gateway Motorway) for 60km of riding. If it is earlier in the night than I'd only put them on high on the backstreets where theres no traffic and if I see a car I just simply change the bightness and then put them back to high or if I'm in traffic it will be on medium/flash mode.
- MattyK
- Posts: 3252
- Joined: Fri Oct 01, 2010 1:07 pm
- Location: Melbourne
Re: How bright is to bright?
Postby MattyK » Mon Apr 01, 2013 2:46 pm
A bar mounted high/low switch would work well.trailgumby wrote:I agree there needs to be work in this area. Full flood spread is great for off-road use, but needs focus for on-road.MattyK wrote:If I find one of those approaching me on a bike track I'll be happy to assist the owner to dismount... Lumens are good, i love the ~7000 my car puts out, but uncontrolled lumens are bad.
However, I'd be reluctant to give up my helmet spot. Being able to light up the interior of inattentive drivers' cabins has helped me avoid too many potential collisions to count.
This is pretty good: http://www.mea.philips.com/c/Bicycle%20 ... 0dbx1/prd/" onclick="window.open(this.href);return false;
The effect of glare and a well shaped beam vs a high beam is illustrated well at 1:22 and 2:12
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Mon Apr 01, 2013 3:28 pm
Nice product. That's the Philips light I mentioned earlier as one of the lights from Europe that have excellent optics that will meet the German bicycle light laws. Not sure where the video is though, or the bar-mounted high/low switchMattyK wrote:A bar mounted high/low switch would work well.
This is pretty good: http://www.mea.philips.com/c/Bicycle%20 ... 0dbx1/prd/" onclick="window.open(this.href);return false;
The effect of glare and a well shaped beam vs a high beam is illustrated well at 1:22 and 2:12
They also have an excellent tail-light - the Philips Saferide
Incidentally, I didn't realise that Philips lights were made by the Philips Corporation
- trailgumby
- Posts: 15469
- Joined: Sat Jan 03, 2009 5:30 pm
- Location: Northern Beaches, Sydney
- Contact:
Re: How bright is to bright?
Postby trailgumby » Mon Apr 01, 2013 3:30 pm
With respect, no, I am not missing the point. I simply disagree with you as to the facts.il padrone wrote:You are missing the point. I did not say "look at the lights", but rather "shine the lights at your face".trailgumby wrote:Agree. But then, that's not what peeps with any brains do.il padrone wrote:Have a bit of a think about that and you'll realise that is not how it works. If you're still not convinced then shine your lights on a wall tonight to "adjust" your eyes. Then turn the bike right around and shine the lights at your face and see how good this has been to prevent you being dazzled.
So tell me, how often do you look directly at oncoming car headlights?
Do you think I am the only one around Sydney having AyUps on my commuter bike? So long as I avoid looking directly at the oncoming lights I have no problem with being dazzled. Yes it is a little bit uncomfortable, but so what? You just just deal with it. It really isn't that hard.
In that respect it is no different to dealing with oncoming car headlights on country roads. You just look down and to the left of the opposing lights. They need to have enough light to be able to see where they are going too. I don't see how bikes should not be afforded the same allowance.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Mon Apr 01, 2013 3:39 pm
Yes, I do drive a car, often enough on country roads at night. I know how to deal with bright head-lightstrailgumby wrote:Do you think I am the only one around Sydney having AyUps on my commuter bike? So long as I avoid looking directly at the oncoming lights I have no problem with being dazzled. Yes it is a little bit uncomfortable, but so what? You just just deal with it. It really isn't that hard.
In that respect it is no different to dealing with oncoming car headlights on country roads. You just look down and to the left of the opposing lights.
The one difference with your car headlights is optics. That's what makes the difference between the car high beam (basically the concentric beam) and the low beam (optically altered to give a less dazzling beam with a light horizon). If you think it's OK for drivers to keep the high beam on, well good luck to you.
A 2200 lumens concentric-beam bike light is getting to be pretty much the same light intensity as a car head-light on high beam. I don't want to have to face that coming towards me, looking aside or not.
- trailgumby
- Posts: 15469
- Joined: Sat Jan 03, 2009 5:30 pm
- Location: Northern Beaches, Sydney
- Contact:
Re: How bright is to bright?
Postby trailgumby » Mon Apr 01, 2013 3:46 pm
And I have no disagreement with you on either point! I agree with you, which you seem to have missed.il padrone wrote:The one difference with your car headlights is optics. That's what makes the difference between the car high beam (basically the concentric beam) and the low beam (optically altered to give a low, less dazzling beam). If you think it's OK for drivers to keep the high beam on, well good luck to you.
A 2200 lumens concentric bike light is getting to be pretty much the same light intensity as a car head-light on high beam. I don't want to have to face that coming towards me, looking aside or not.
However, those complaining about Ay-Ups with only (about) 350 lumens per pair, most of which is concentrated in a very narrow hotspot, with a rapid fall-off in intensity around the sides, and which has much less power than a car low beam, need to harden up.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Mon Apr 01, 2013 4:12 pm
My Supernova E3 head-light is pretty similar - 370 lumens concentric light. Great for country road riding at night where it gives very good range. People often comment on how bright it is. However it drops off rapidly away from dead-centre.
Planning on getting a B&M iQ Luxos U for future uses - better beam for around town and great long range beam at higher speeds as well. Best of both worlds.
- trailgumby
- Posts: 15469
- Joined: Sat Jan 03, 2009 5:30 pm
- Location: Northern Beaches, Sydney
- Contact:
Re: How bright is to bright?
Postby trailgumby » Mon Apr 01, 2013 4:39 pm
No worries. I respect your opinions, you have a solid head screwed on your shoulders.il padrone wrote:Oh yes. OK...
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Mon Apr 01, 2013 4:49 pm
I bought myself the Supernova E3 Pro (concentric lens) - 370 lumens
Should have bought the Supernova E3 Pro with asymmetric lens - 310 lumens
I was put off by the stated lower lumens Had not seen these photos beforehand.
- London Boy
- Posts: 818
- Joined: Fri Nov 19, 2010 3:43 pm
Re: How bright is to bright?
Postby London Boy » Mon Apr 01, 2013 10:32 pm
So long as you carry adequate third party insurance you should be fine with that.trailgumby wrote:The only whingers are those with idiotically inadequate or no lights. Complaining about my lights when you are a dark indeterminate barely detectable object heading in my direction on a possible collision course, well, i make no apology for reflexively giving you my headlight spot beam to work out what sort of threat you might be. Harden up and get some better lights you can see by you goose.
I don't know that it has been tested in court, but shining a bright light at what a reasonable person would assume is an oncoming cyclist would quite possibly be held negligent. That could get horribly expensive.
- MattyK
- Posts: 3252
- Joined: Fri Oct 01, 2010 1:07 pm
- Location: Melbourne
Re: How bright is to bright?
Postby MattyK » Mon Apr 01, 2013 10:34 pm
Sorry posting from phone...il padrone wrote:Nice product. That's the Philips light I mentioned earlier as one of the lights from Europe that have excellent optics that will meet the German bicycle light laws. Not sure where the video is though, or the bar-mounted high/low switchMattyK wrote:A bar mounted high/low switch would work well.
This is pretty good: http://www.mea.philips.com/c/Bicycle%20 ... 0dbx1/prd/" onclick="window.open(this.href);return false;
The effect of glare and a well shaped beam vs a high beam is illustrated well at 1:22 and 2:12
They also have an excellent tail-light - the Philips Saferide
Incidentally, I didn't realise that Philips lights were made by the Philips Corporation
Video:
http://youtu.be/0eoXpfMpxqo" onclick="window.open(this.href);return false;
It doesn't have a bar mounted switch, I just said that would be nice
I have that taillight also, it is excellent
- landscapecadmonkey
- Posts: 372
- Joined: Fri Jul 16, 2010 2:46 am
- Location: Brisbane
Re: How bright is to bright?
Postby landscapecadmonkey » Tue Apr 02, 2013 12:21 am
angled up, bad
that's whey there's a specific test on the angle of car headlights.
the amount of urban numpties with roo spotters is increasing.
- ZepinAtor
- Posts: 1558
- Joined: Fri Nov 26, 2010 7:46 pm
- Location: Brizzzzbane Everton Hillzzzz
Re: How bright is to bright?
Postby ZepinAtor » Tue Apr 02, 2013 12:47 am
Funny coincidence that Lukeboy I ride the exact same pathways at about 6-7pm & on roads about the same time & I'm also using a similar Exposure light with a claimed 975 lumen output.Lukeyboy wrote:With exposure lights they are mostly designed for off road/off road racing......................
It picks up all the stones/sticks/glass on the ground, I can see all the toads that have migrated onto the pathway, I can see the eyes of animals off the side of the pathway, peds in the distance, dirt/sand on the ground, pick up fallen trees which had blocked the entire pathway (has happened to me twice) along with many other uses. There are times where I wish it was brighter just for those reasons
I find it easy to dip down to 600 or 300 with fairly positive responses from other path users. Usually a thanks or a nod after they lower their hand from their eyes which they've raised for obvious reasons in anticipation of a good blinding. I also either direct my eyes to the edge of the path as others approach as I understand the KBB can be a dangerous path late at night with tight bends, toads, snakes & surprise sand traps.
On the MTB I'm running 2 x 975 Lumens. Helmet mount & bar mount. A definite must at 40+km/hr in the forest or racing off road.
-
- Posts: 758
- Joined: Sun Jul 25, 2010 8:58 pm
- Location: Chatswood, NSW
Re: How bright is to bright?
Postby NhiTrac » Tue Apr 02, 2013 7:49 am
A) going with flow of traffic
B) oncoming cyclist are on the other side of the road
I guess I've never experienced it as 99% of my riding is on the road.
Ps if they made one of those Supernova E3 lights that's battery operated, I would've bought it in a heart beat.
- ColinOldnCranky
- Posts: 6734
- Joined: Fri Feb 27, 2009 4:58 pm
Re: How bright is to bright?
Postby ColinOldnCranky » Tue Apr 02, 2013 8:10 am
In the dark start to the day ride is on a PSP. The saving grace is that not many are on the path at 5:40. Those that are will all have lights, too many of them very bright. I will get it a dozen times a day, five days a week from March until September or so. If I was in a state that had daylight saving then there would be more months still.NhiTrac wrote:After all this brightness debate, I'm curious as to how many of us so most of our riding on bike paths where it's pretty much the only place possible to have another one's beam shining in your retina. If you're riding on the side of the road it should not be an issue as
A) going with flow of traffic
B) oncoming cyclist are on the other side of the road
I guess I've never experienced it as 99% of my riding is on the road.
Ps if they made one of those Supernova E3 lights that's battery operated, I would've bought it in a heart beat.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Tue Apr 02, 2013 8:18 am
I'm not sure why you think this is the case? If it is not an issue why is it illegal to run car headlights on high beam in town?NhiTrac wrote:After all this brightness debate, I'm curious as to how many of us so most of our riding on bike paths where it's pretty much the only place possible to have another one's beam shining in your retina. If you're riding on the side of the road it should not be an issue
The Supernova Airstream is the same light in battery formatNhiTrac wrote:Ps if they made one of those Supernova E3 lights that's battery operated, I would've bought it in a heart beat.
Airstream headlight beam
There is also the Supernova Big Bang HID light, a lot brighter but that is no longer made.
-
- Posts: 758
- Joined: Sun Jul 25, 2010 8:58 pm
- Location: Chatswood, NSW
Re: How bright is to bright?
Postby NhiTrac » Tue Apr 02, 2013 8:57 am
Understand where you're coming from. Perhaps I've never experienced another cyclist's light where it was so dazzling that I would consider it dangerous. I guess I also assume that other cyclist with powerful lights don't simply just mount it and ride away, but they would dip it towards the ground as well as view it from other cyclist/motorist point of view. I.e. get in front of it and see if its glaring, adjust and repeat. I did this several times with my twin Ayups before I was satisfied with my setup.il padrone wrote:I'm not sure why you think this is the case? If it is not an issue why is it illegal to run car headlights on high beam in town?NhiTrac wrote:After all this brightness debate, I'm curious as to how many of us so most of our riding on bike paths where it's pretty much the only place possible to have another one's beam shining in your retina. If you're riding on the side of the road it should not be an issue
The Supernova Airstream is the same light in battery formatNhiTrac wrote:Ps if they made one of those Supernova E3 lights that's battery operated, I would've bought it in a heart beat.
Airstream headlight beam
There is also the Supernova Big Bang HID light, a lot brighter but that is no longer made.
Thanks for the link... I had actually meant to say battery operated version of the G&M IQ Luxos U lights (wrote it whilst on my iphone on the train and didnt check the brand)...
Cheers
-
- Posts: 1531
- Joined: Sat Aug 28, 2010 10:21 pm
- Location: Sydney
Re: How bright is to bright?
Postby am50em » Tue Apr 02, 2013 9:26 am
I believe it is legal to use high beam in built up areas. I am sure when I learned to drive it was illegal but the rule was changed a long while ago.il padrone wrote: I'm not sure why you think this is the case? If it is not an issue why is it illegal to run car headlights on high beam in town?
While trying to find the definitive rule, I did find
http://www.austlii.edu.au/au/legis/nsw/ ... rr2008104/
So the anti-dazzle rule does not apply to cyclistsPART 13 - LIGHTS AND WARNING DEVICES
Division 1 - Lights on vehicles (except bicycles, animals and animal-drawn vehicles)
214. Division does not apply to riders of bicycles, animals or animal-drawn vehicles
214-1. NSW rule: interpretation
215. Australian Road Rule not reproduced
215-1. NSW rule: using lights when driving in dark
216. Towing a vehicle at night or in hazardous weather conditions
217. Australian Road Rule not reproduced
218. Using headlights on high-beam
218-1. NSW rule: using lights on vehicles generally
219. Lights not to be used to dazzle other road users
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Tue Apr 02, 2013 9:53 am
Ah, yes. Thanks for pointing that out. The rule is that it is illegal to use high beam if another vehicle is within 200 metres ahead of you (oncoming or travelling the same direction)am50em wrote:I believe it is legal to use high beam in built up areas.
Yes, but that is my point. The change of technology such that bike lights are now as bright as, or brighter than, an automobile high beam surely prompts a need for a review of the rulesam50em wrote:So the anti-dazzle rule does not apply to cyclists
- Lukeyboy
- Posts: 3621
- Joined: Tue May 29, 2012 2:38 am
Re: How bright is to bright?
Postby Lukeyboy » Tue Apr 02, 2013 9:56 am
-
- Posts: 1531
- Joined: Sat Aug 28, 2010 10:21 pm
- Location: Sydney
Re: How bright is to bright?
Postby am50em » Tue Apr 02, 2013 9:59 am
Agreed but who initiates that? What is the ADR process? It would be good to have some cyclist input to it.il padrone wrote:Yes, but that is my point. The change of technology such that bike lights are now as bright or brighter than an automobile high beam surely prompts a need for a review of the rulesam50em wrote:So the anti-dazzle rule does not apply to cyclists
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: How bright is to bright?
Postby il padrone » Tue Apr 02, 2013 10:07 am
I've watched the exponential growth in LED headlight output and have been concerned over the past couple of years. The direction is all power and no control
- rdp_au
- Posts: 563
- Joined: Wed Feb 07, 2007 5:45 pm
- Location: Hornsby, Sydney, NSW
Re: How bright is to bright?
Postby rdp_au » Tue Apr 02, 2013 10:26 am
Well said.il padrone wrote:I've watched the exponential growth in LED headlight output and have been concerned over the past couple of years. The direction is all power and no control
My commute is a mixture of unlit shared paths and on road which allows cruising speeds in the mid thirties, with sections up to the mid sixties, so good lights are a necessity. I have been using AYUPs for a few years, recently with the newer high power LEDs. To be honest, the single light unit, even with the high power LEDs is only barely adequate at higher speeds, and I have had complaints from other cyclists on shared paths if I have it angled for best long distance coverage.
I’d been on the lookout for something with better road oriented optics for a while, but the only ones available were from Europe and pretty pricy. Recently, the Philips Safety Light was on special and I was able to pick one up for $80 delivered. My initial impressions are that it will work very well as a proper road light. The optics are designed to comply with European regulations which require a cutoff to prevent dazzling oncoming road users. This works very well, as there is a broad and fairly even spread of light from close to the front wheel out to a long way down the road. The beam is also wide so it spreads out to light up the sides of the road as well. Comparing the two lights while standing about 20 metres in front of the bike parked in my driveway is interesting. The AYUPs are very bright and quite dazzling - as to be expected. The Philips looks just like a car headlight on dipped beam. My initial experiences on a few commutes home when it’s been properly dark are that it is much better than the AYUPs, even though it claims only about two thirds of the light output. What it does lack, though, is a flashing mode, which I like to use during the day and especially in the early morning and late evening twilight. At the moment, I’ve got what I think is the best of both worlds with both lights on the bike, the AYUPs for their flashing capability and the Philips for when it gets completely dark.
- MattyK
- Posts: 3252
- Joined: Fri Oct 01, 2010 1:07 pm
- Location: Melbourne
Re: How bright is to bright?
Postby MattyK » Tue Apr 02, 2013 10:57 am
^ This guy gets it.rdp_au wrote:.... Recently, the Philips Safety Light was on special and I was able to pick one up for $80 delivered. My initial impressions are that it will work very well as a proper road light. The optics are designed to comply with European regulations which require a cutoff to prevent dazzling oncoming road users. This works very well, as there is a broad and fairly even spread of light from close to the front wheel out to a long way down the road. The beam is also wide so it spreads out to light up the sides of the road as well. Comparing the two lights while standing about 20 metres in front of the bike parked in my driveway is interesting. The AYUPs are very bright and quite dazzling - as to be expected. The Philips looks just like a car headlight on dipped beam.
You just can't achieve the same effect by tilting a concentric beam pattern light downwards. All it does is blow out the foreground exposure and reduce the distance illumination, and it still doesn't eliminate the glare.
PS: from in front, duck your head down into the beam part of the Philips. Wear a welding mask though...
Philips light has been tested (in a proper integrating sphere) as a genuine 270 lumens. Many lights haven't been, and output is based on theory / magical pixieland numbers. (Not disparaging Ay-ups though, I have not seen any test results for them. Supernova have suspect numbers though, ref swhs's website)My initial experiences on a few commutes home when it’s been properly dark are that it is much better than the AYUPs, even though it claims only about two thirds of the light output.
Return to “General Cycling Discussion”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.