Belt Drive

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

Belt Drive

Postby Sparx » Fri May 24, 2013 9:03 am

I have an Avanti Inc 3 with Gates carbon belt drive. I am struggling to figure out how to re-fit the belt after taking the wheel off. According to Gates you are not supposed to 'walk' the belt back on. By this I take it to mean putting the belt partially on the chain wheel and turning the cranks. This is what I have been doing however I did notice a bit of fraying on the belts teeth.

Any ideas?
Sparx
 
Posts: 118
Joined: Wed Dec 12, 2012 2:57 pm

by BNA » Fri May 24, 2013 11:01 am

BNA
 

Re: Belt Drive

Postby Crawf » Fri May 24, 2013 11:01 am

Could also ask in here - viewtopic.php?f=41&t=43485
Crawf
 
Posts: 1593
Joined: Wed Jan 09, 2008 8:20 pm

Re: Belt Drive

Postby CrashBoomBang » Mon Jun 10, 2013 1:32 am

Here is Gates' instructional video on installing the belt: http://www.youtube.com/watch?v=0khWNhxhG5s
Hope that helps.
User avatar
CrashBoomBang
 
Posts: 27
Joined: Fri Apr 20, 2012 2:52 pm
Location: Sydney


Return to The Shed

Who is online

Users browsing this forum: Ignoto



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist