Eno Pawls

[gururug]

So..... after approx 7000km's ( Do that on a 10 speed cassette! ) my trusty 16t WI eno.... started skipping...

Will crack her open and take a look, external teeth seem to be at about 85%...

Anyone knows of a shop in Syd / Online that might do PAWLS..... Quick search reveals they run at around 5pounds ( $12-$15 ) each..... I've got another one I can pinch the pawls from...

It locked up once or twice in the previous week... so best to check if this happens to you...

[dodgiebros]

Dude, buy a new one. Be happy you got 7000 km out of it.

[ldrcycles]

Dude, buy a new one. Be happy you got 7000 km out of it.

But isn't the entire point of an eno the fact it can be repaired?

[gururug]

Ordered a new one... Seems the pawls are a little thin on the ground...

[gururug]

Just an update to this one......

-New one arrived
-Pulled old one apart

Seems it may have been filth ( major cause ) rather than pawl wear ( minor cause / effect ). Not to self, Maintain my shiznit!!!

Image attached ( also, the teeth seem more liek 60-70%WORN rather than the 80%NEW I originally guesstimated.... So new freewheel wasn't total money burn.



Will kerosoak'n'lightgrease the lil fella and see if he kicks back into action!

[gururug]

She's right as rain ... and I did manage to get a spare set of pawls from prowheelbuilder...

FYI one LBS said Doosh in Syd were registered importer of pawls... but I didn't confirm...