Tip for keeping parts in order

twowheels
Posts: 1162
Joined: Mon Apr 23, 2007 6:14 pm
Location: Perth

Tip for keeping parts in order

Postby twowheels » Fri Aug 10, 2018 7:53 am

I had an idea about keeping disassembled parts in order. Place them on strips of flexible refrigerator magnet in order then photograph before cleaning. Replace clean parts on magnet strip in order then reassemble.

Jmuzz
Posts: 454
Joined: Mon Jan 29, 2018 1:42 pm

Re: Tip for keeping parts in order

Postby Jmuzz » Fri Aug 10, 2018 3:41 pm

Perhaps on old bikes.
But modern stuff has so much alloy, plastic and other non magnetic stuff so relying on magnets probably won't work well.

There are specialist disassembly trays in various industries, or just a generic square grid tray.

twowheels
Posts: 1162
Joined: Mon Apr 23, 2007 6:14 pm
Location: Perth

Re: Tip for keeping parts in order

Postby twowheels » Fri Aug 10, 2018 6:44 pm

Ice cube tray

Tamiya
Posts: 31
Joined: Mon May 28, 2018 12:15 am

Re: Tip for keeping parts in order

Postby Tamiya » Sat Aug 11, 2018 12:29 am

Depends how long that project is staying disassembled! :twisted:

If it'll be a long while before reassembly & there's good chance the parts will be moved about etc etc... Gaffer tape!

I get a tray or a decent sized board, lay down strips of tape sticky side up. Tape the tape to the board. Put parts on the tape in sequence of disassembly.

If I need to move or transport the taped parts, I cover over with clear packing tape. It's like blister packing, never lose parts that way.

Who is online

Users browsing this forum: No registered users