I hope this is the right forum. Apologies if not.
My wife and I are on the train from Ballarat. Her tube was flat this morning. We've done a repair. I tried a BBB pressure gauge I bought a while back, but to fit it on the Schrader valve had to unscrew an adaptor for Prestas. We're not confident the reading was right.
I screwed the adaptor back on and checked my tubeless tyres with Prestas. Got a reading 0 no matter what I did. I'll have to pump a bit when we get to Southern Cross because I reckon I've lost quite a lot trying to get the thing to work. The weird thing is I used it a few days ago and had problem at all, but at that time I hadn't used it on Schraders before. The main body is made of soft plastic and I think I might have stripped the thread.
Can anyone recommend a reliable pressure gauge please? Preferably one without a Versace price tag.
Reliable pressure gauge
-
- Posts: 44
- Joined: Sun Apr 15, 2018 2:04 pm
- open roader
- Posts: 3677
- Joined: Tue Jul 28, 2009 7:05 pm
- Location: Dueling Banjo Country, Otway fringes, Victoria
Re: Reliable pressure gauge
Postby open roader » Wed Sep 18, 2024 9:16 pm
Topeak D2.
I have a trio of them, the original one is 14+ years old and still works perfectly. Runs on coin battery that lasts at least 2.5 years, more like 3 years.
Digital readout in PSI / BAR or kg/cm2, rotating head, presta or schrader inflation with just a flip of a lever (no adapters), a bleed button with updating read out and it turns off automatically after sitting idle for XX seconds.
I swear by mine, and all three units read exactly the same as each other ie) no variation across my sample of 3 units tested back to back.
I have a trio of them, the original one is 14+ years old and still works perfectly. Runs on coin battery that lasts at least 2.5 years, more like 3 years.
Digital readout in PSI / BAR or kg/cm2, rotating head, presta or schrader inflation with just a flip of a lever (no adapters), a bleed button with updating read out and it turns off automatically after sitting idle for XX seconds.
I swear by mine, and all three units read exactly the same as each other ie) no variation across my sample of 3 units tested back to back.
3rd class cycling is always better than 1st class walking
-
- Posts: 102
- Joined: Mon Feb 05, 2024 10:14 pm
- Location: Hobart
Re: Reliable pressure gauge
Postby Anrai » Thu Sep 19, 2024 11:35 am
I bought a D2X and not sure how I feel about it. It's really hard to read in any kind of sunlight (i.e. where I'd like to take my bike) and maybe I'm still learning the functions, but is it supposed to bleed pressure the moment I hit the Tune button? I thought it was only supposed to do that when I'm pressing the button that's supposed to release the pressure?open roader wrote: ↑Wed Sep 18, 2024 9:16 pmTopeak D2.
I have a trio of them, the original one is 14+ years old and still works perfectly. Runs on coin battery that lasts at least 2.5 years, more like 3 years.
Digital readout in PSI / BAR or kg/cm2, rotating head, presta or schrader inflation with just a flip of a lever (no adapters), a bleed button with updating read out and it turns off automatically after sitting idle for XX seconds.
I swear by mine, and all three units read exactly the same as each other ie) no variation across my sample of 3 units tested back to back.
- open roader
- Posts: 3677
- Joined: Tue Jul 28, 2009 7:05 pm
- Location: Dueling Banjo Country, Otway fringes, Victoria
Re: Reliable pressure gauge
Postby open roader » Thu Sep 19, 2024 12:04 pm
D2x has an LED display, the older D2 model has LCD = easier to read in daylight.
Youtube is your friend for D2x instructionals
Youtube is your friend for D2x instructionals
3rd class cycling is always better than 1st class walking
- WyvernRH
- Posts: 3303
- Joined: Tue Nov 06, 2007 6:41 pm
- Location: Newcastle NSW
Re: Reliable pressure gauge
Postby WyvernRH » Thu Sep 19, 2024 9:43 pm
Yes +1 for the Topeak D2. I've got a couple of these (workshop/campervan) and both have given me good service over several years. Easy to use and consistent. Sounds like the new version is a bit of a downgrade?
Richard
-
- Posts: 200
- Joined: Tue Dec 17, 2013 7:17 pm
Re: Reliable pressure gauge
Postby Newcastle Dave » Fri Sep 20, 2024 9:20 am
Damm, I just ordered the updated model
- WyvernRH
- Posts: 3303
- Joined: Tue Nov 06, 2007 6:41 pm
- Location: Newcastle NSW
Re: Reliable pressure gauge
Postby WyvernRH » Sat Sep 21, 2024 4:39 pm
Well, I view this as a workshop tool really, I don't carry it around on rides, so the (apparently) reduced visibility would not be a problem.
Actually, some of the LCDs are fading a bit on my oldest D2 so sometime soon I'm going to have to buy a new one. It is quite old, probably well over 10 years or so.
Richard
-
- Posts: 465
- Joined: Mon Jun 11, 2007 11:34 pm
- Location: Melbourne
Re: Reliable pressure gauge
Postby Matty » Sun Sep 22, 2024 12:50 am
I like the Fumpa pressure gauge. Nice and slim. The numbers I find are easier to read than the Topeak LCD but as it's fixed head, it can be harder to get line of sight to it. Also, not as easy to swap between Presta and Schrader valves.
https://www.fumpapumps.com.au/products/fumpa-gauge
https://www.fumpapumps.com.au/products/fumpa-gauge
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.