I ended up getting the Venzo one on discount before the Black Friday sales.
https://www.cyclingdeal.com.au/buy/venz ... VZ-F33-031
It’s arrived but Im not sure whether I need to do something special when using for the first time. It says on the instructions that if the torque wrench has not been used before I should operate it a few times on a low torque setting so the lubricant has a chance to recoat before use.
So this is what I did, I set it on 2NM. The direction toggle is pointing to the right at 5 o clock and I’m using the wrench on one of my cage bottle mount bolts which is supposed to adjust to 4 nM. However I don’t hear the click. The bolt it almost tightened completely but no click. Is 2NM enough to test this? I only hear the dial clicks when I push downwards. Have I done something wrong?
https://youtu.be/rQybDrF0Oj0
This video at the 25 second mark says the complete opposite and says must be activated at high torque setting 5 times to activate.