Reid Harrier to buy or not?
- albertgaleano
- Posts: 199
- Joined: Sun Nov 20, 2011 9:12 pm
- Location: Brisbane
Reid Harrier to buy or not?
Postby albertgaleano » Sun May 13, 2012 9:21 pm
- malocchio
- Posts: 134
- Joined: Mon Apr 19, 2010 2:31 pm
Re: Reid Harrier to buy or not?
Postby malocchio » Mon May 14, 2012 9:31 am
That being said, I've not ridden any other singlespeed bikes so I can't give you much of a review, but all I can say is that they're darn heavy! I use it for running around on weekends and it does what it needs to do. If you're looking for something to get you from A to B without any maintenance, it's a very cheap way to do it.
Plus, the colour combo that I've got has garnered plenty of compliments. The cost-to-compliment ratio is out of this world!
- albertgaleano
- Posts: 199
- Joined: Sun Nov 20, 2011 9:12 pm
- Location: Brisbane
Re: Reid Harrier to buy or not?
Postby albertgaleano » Mon May 14, 2012 6:58 pm
Thanks for the reply!!!!
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: Reid Harrier to buy or not?
Postby ldrcycles » Mon May 14, 2012 7:53 pm
http://www.bicycles.net.au/forums/viewt ... =9&t=51119
-
- Posts: 109
- Joined: Wed Mar 21, 2012 6:31 pm
- Location: St Lucia, Brisbane
Re: Reid Harrier to buy or not?
Postby slarv » Mon May 14, 2012 8:51 pm
I was disappointed to find the local big W didn't have any in stock. They are pretty easy to spot on gumtree.ldrcycles wrote:This is a singlespeed rather than a fixie, but for a short commute it would be damn hard to beat (and not bad for long rides either).
http://www.bicycles.net.au/forums/viewt ... =9&t=51119
- HLC
- Posts: 722
- Joined: Sun Mar 04, 2012 11:23 pm
- Location: Sydney.
Re: Reid Harrier to buy or not?
Postby HLC » Mon May 14, 2012 9:11 pm
Stay away from jellybean/chapelli/Jube/whatever else that is similar.
If you are not fussed, then get something cheaper and save the extra coin for beers at the destination.
-
- Posts: 7
- Joined: Mon Apr 16, 2012 11:47 am
Re: Reid Harrier to buy or not?
Postby reid_cycles » Wed May 23, 2012 11:02 am
Its James from Reid Cycles here.
There are many fixies on the market and from what I’ve seen the quality varies greatly.
Our Harrier has a flip/flop hub so can be ridden as fixed or singlespeed which most people prefer for an easier ride.
When we designed our bike we had quality and value in mind first and colour options second.
There are a lot of cheap quality fixies getting around with mostly no name parts which I would have serious doubts about the reliability.
The Harrier uses all well known brand name parts and I can honestly say they are our most bullet proof bike.
In our shop I have seen most of the fixies on the market and by coincidence, spec for spec it’s almost identical with the Bianchi Pista.(which is a great bike I must add)
We have a lot of different wheel options, most people go with the deep V rims for looks, the best wheel performance wise is the Alex rim with sealed bearing hubs, it’s a much lighter and faster wheel.
Cheers
- albertgaleano
- Posts: 199
- Joined: Sun Nov 20, 2011 9:12 pm
- Location: Brisbane
Re: Reid Harrier to buy or not?
Postby albertgaleano » Wed May 23, 2012 6:23 pm
Iam very keen to make my first singlespeed bike purchase, with the harrier on the top of my list at the moment, iam near your shop here in brisbane and have just had a test ride the other day, can't wait to make it my daily commuter.
-
- Posts: 725
- Joined: Sat Jul 09, 2011 8:33 pm
Re: Reid Harrier to buy or not?
Postby BRLVR.v2 » Sun May 27, 2012 8:13 pm
You forgot the bit about what a boat anchor they are weight wise.reid_cycles wrote:Hi,
Its James from Reid Cycles here.
There are many fixies on the market and from what I’ve seen the quality varies greatly.
Our Harrier has a flip/flop hub so can be ridden as fixed or singlespeed which most people prefer for an easier ride.
When we designed our bike we had quality and value in mind first and colour options second.
There are a lot of cheap quality fixies getting around with mostly no name parts which I would have serious doubts about the reliability.
The Harrier uses all well known brand name parts and I can honestly say they are our most bullet proof bike.
In our shop I have seen most of the fixies on the market and by coincidence, spec for spec it’s almost identical with the Bianchi Pista.(which is a great bike I must add)
We have a lot of different wheel options, most people go with the deep V rims for looks, the best wheel performance wise is the Alex rim with sealed bearing hubs, it’s a much lighter and faster wheel.
Cheers
Buy a Fuji classic . The BB is higher and the geometry is snappier than the locally cobbled together dross.
- vaeske
- Posts: 1013
- Joined: Thu May 05, 2011 9:22 am
- Location: Brisbane
- Contact:
Re: Reid Harrier to buy or not?
Postby vaeske » Fri Jun 01, 2012 11:25 am
GOLD.BRLVR.v2 wrote: You forgot the bit about what a boat anchor they are weight wise.
-
- Posts: 10
- Joined: Wed Jun 06, 2012 2:10 pm
Re: Reid Harrier to buy or not?
Postby Clintos » Wed Jun 06, 2012 2:28 pm
New to forum, I just purchased a Reid Harrier last week. I ordered online, bike took a week to be ready for pick up so no complaints there, the staff were friendly enough when I picked it up and seems good value with all the little bits you get for $369.00.
First ride out I found the back wheel hadn't been tightened enough and moved up on one side causing wheel to hit frame, fixed this myself and haven't had an issue since, I'm pretty new to riding so couldn't tell you if the ride is good or not, I think the main thing is the price, this encouraged me to get into riding again and that surely isn't a bad thing?
I'm sure Reid bikes aren't that cool to all the hipsters but it does the job for me so far.
-
- Posts: 109
- Joined: Wed Mar 21, 2012 6:31 pm
- Location: St Lucia, Brisbane
Re: Reid Harrier to buy or not?
Postby slarv » Thu Jun 07, 2012 8:58 am
Hi Clintos,Clintos wrote:Hi all,
New to forum, I just purchased a Reid Harrier last week. I ordered online, bike took a week to be ready for pick up so no complaints there, the staff were friendly enough when I picked it up and seems good value with all the little bits you get for $369.00.
Just wondering which store you picked it up from?
Regards,
Slarv
-
- Posts: 10
- Joined: Wed Jun 06, 2012 2:10 pm
Re: Reid Harrier to buy or not?
Postby Clintos » Thu Jun 07, 2012 4:52 pm
Hi there,slarv wrote:Hi Clintos,Clintos wrote:Hi all,
New to forum, I just purchased a Reid Harrier last week. I ordered online, bike took a week to be ready for pick up so no complaints there, the staff were friendly enough when I picked it up and seems good value with all the little bits you get for $369.00.
Just wondering which store you picked it up from?
Regards,
Slarv
Picked it up from North Melbourne store on Victoria Road. I took it for my first decent ride last night to Northcote and back, about 15 Ks, it did not blow up, surprising after some of the comments on these forums.
- PeteV
- Posts: 167
- Joined: Fri Nov 12, 2010 11:01 am
- Location: Northern 'burbs, Adelaide
Re: Reid Harrier to buy or not?
Postby PeteV » Fri Jun 08, 2012 8:11 am
-
- Posts: 1
- Joined: Tue Jun 12, 2012 9:38 pm
Re: Reid Harrier to buy or not?
Postby denbot » Tue Jun 12, 2012 9:46 pm
Granted I changed the bars and pedals, everything rides really nicely. I live in regional NSW and I bought it online - arrived the next day by freight.
Was incredibly easy to put together as well.
I don't have any issues with the weight either as some are complaining about.
I'll add that the fuji track classic is almost the exact same weight at 10.03kgs versus 10.5kgs, provided you aren't racing I don't think you'll notice a difference here.
-
- Posts: 536
- Joined: Fri Apr 17, 2009 5:18 pm
- Location: Northcote
Re: Reid Harrier to buy or not?
Postby misterhorsey » Thu Jun 14, 2012 11:15 am
But man, the fact that all the 'people' who provide their opinions on the back of a solitary post sound exactly the same is incredibly irritating!
http://www.newscientist.com/blogs/onepe ... uns-o.html
I'm convinced that astroturfing is bad for a company's brand, so in this respect I feel badly for Mr Reid. I do respect him for providing cheap bikes to people who may find the idea of a 1.5k and upwards eye watering. But over the long run, his business can't benefit from all the ethereal posters that seem to swam to the forum whenever a REID is mentioned - wherever they are coming from.
And this too, if anyone is unfamilar with the topic (albeit, much higher stakes than cheap bikes!):
http://www.guardian.co.uk/environment/g ... troturfing
-
- Posts: 10
- Joined: Wed Jun 06, 2012 2:10 pm
Re: Reid Harrier to buy or not?
Postby Clintos » Thu Jun 14, 2012 12:48 pm
I feel pretty confident with the warranty and if I continue to ride I'm sure the bike will just be a good cheap stepping stone for me.
-
- Posts: 536
- Joined: Fri Apr 17, 2009 5:18 pm
- Location: Northcote
Re: Reid Harrier to buy or not?
Postby misterhorsey » Thu Jun 14, 2012 5:35 pm
I think the problem with astroturfing is that it gets a brand's name out and about, and that's good PR. But it acts to undermine trust in other honest reviews. For example, if people sense one review is perhaps not kosher, or that the same person is writing reviews from different users, then you start discounting potentially honest/real reviews.Clintos wrote:Your probably right that that type of advertising if true would be of no benefit, after trying to research before purchase the Reid threads only put me off buying but as the alternatives mentioned by other long time posters were non existent I purchased anyway, for me I don't know any better so the bike seems fine.
I feel pretty confident with the warranty and if I continue to ride I'm sure the bike will just be a good cheap stepping stone for me.
For example Clintos, because you only had 4 posts up til now I went and checked out your other posts to see if you were real or not. The fact that you posted an item in the Stolen bike forum suggests that you are. Apologies for snooping! But my commiserations about the stolen bike
But I see Mulger Bill did a fair indepth review of one of the bikes a while ago.
Anyway, apologies if I'm resurrecting a topic that is dead and buried.
-
- Posts: 109
- Joined: Wed Mar 21, 2012 6:31 pm
- Location: St Lucia, Brisbane
Re: Reid Harrier to buy or not?
Postby slarv » Thu Jun 14, 2012 5:58 pm
Clintos, I confess to my question having double motives. I wanted to know which store you went to so I could compare it to my own experience if it was the same store. I was also testing the waters to see if you were real Good to see you are sticking around.misterhorsey wrote: For example Clintos, because you only had 4 posts up til now I went and checked out your other posts to see if you were real or not. The fact that you posted an item in the Stolen bike forum suggests that you are. Apologies for snooping! But my commiserations about the stolen bike
- Mulger bill
- Super Mod
- Posts: 29060
- Joined: Sun Sep 24, 2006 2:41 pm
- Location: Sunbury Vic
Re: Reid Harrier to buy or not?
Postby Mulger bill » Thu Jun 14, 2012 8:08 pm
I also regularly use my mod powers to go deeper into any posts that don't feel right to me and to date have busted one and only one sockpuppeteer (Not for Reid BTW).misterhorsey wrote:But I see Mulger Bill did a fair indepth review of one of the bikes a while ago.
That puppetmaster and his/her three socks and their IP address copped a permaban and notification to their ISP.
London Boy 29/12/2011
- HLC
- Posts: 722
- Joined: Sun Mar 04, 2012 11:23 pm
- Location: Sydney.
Re: Reid Harrier to buy or not?
Postby HLC » Thu Jun 14, 2012 10:06 pm
This made me lol. Most die hard fixed gear fans usually refer to 'fixies' as Track Bikes, because in essence, that's what they are.PeteV wrote: A lot of the haters are die hard fixed gear fans who despise the fact that it became a popular hobby for others and caused the mass production of cheaper 'fixies.' Unfortunately most of them have never ridden a 'fixie' so are really basing their comments on what others say.
Which begs the question, why did I post my Bridgestone Track in here? Because I ride it on the street too.
Bikes like this are an 'enabling tool'. Personally, I wouldn't be caught dead riding one. But my GF rides an SE Draft Lite with a few mods, which was a cheap bike to begin with. These cheap 'fixies' get people riding and outdoors again. Some will give up, some do it for street cred, and others will turn into hardcore track tragics like myself. More people riding the better, my only gripe is that these bikes are disposable made with cheap parts to meet a cheap price point. And they can get dangerous.
Anyone remember those 'Potential of Hydrogen' 'fixies'??? I saw them, with busted pedals, a snapped seat post, bent bars, stripped hubs and all sorts of other stupid issues that should never have happened.
- PeteV
- Posts: 167
- Joined: Fri Nov 12, 2010 11:01 am
- Location: Northern 'burbs, Adelaide
Re: Reid Harrier to buy or not?
Postby PeteV » Thu Jun 14, 2012 10:35 pm
-
- Posts: 736
- Joined: Thu Jul 21, 2011 7:09 pm
Re: Reid Harrier to buy or not?
Postby Wal42 » Fri Jun 15, 2012 4:40 am
Bad points- >if you run the std Tektro brakes throw the pads &/or the calipers in the bin & fit something
better (cheap fix really)
> the 'aero' wheels weigh over 4kgs, the braking surfaces don't like having brake pads used on
the & quite quickly start showing where the join is, the bearings flog out quickly & constantly need adjusting
> with only 3 frame sizes, fitting is a little hit & miss
I swapped out the seatpost, stem & seat right from the start, it's not had any other issues as yet, I'm riding it anywhere from 45-50kms (if I commute on it) to around 20-25kms (afternoon training ride), had it now for 3 months.
Yep, some cheap parts but the frame & welding on the frame appear to be sound, if you're starting out it's worth a look, if you're more serious then get your preferred parts before you buy & it's a cheap option, if you're one of these 'serious' riders who it's all about your ego & appearance then spend 10 times the price on something with 'street cred'.
- HLC
- Posts: 722
- Joined: Sun Mar 04, 2012 11:23 pm
- Location: Sydney.
Re: Reid Harrier to buy or not?
Postby HLC » Fri Jun 15, 2012 4:30 pm
I undestand completely! I have a visp built up with a mixed bag of parts, generic and name brand that I use as a Wet Weather/Pub/Track Hack bike!PeteV wrote:Don't get me wrong HLC, I am jonesing for a quality frame in the near future, but given that I am riding SS now since an old knee injury reared it's ugly head after a recent crash, I probably won't be getting the Bridgestone I wanted. I agree that the quality of parts is nowhere near Dura Ace/Campag/Thompson on a lot of the more expensive brands but I have found a lot of hate when I mention I have a Mojo frame (I say frame because I have upgraded most of the parts on mine) and most of the haters have never ridden the bike they are bagging. As long as they get people riding I am happy and as long as the lower quality parts don't put people off buying a better bike as their riding improves.
My concern is the quality of the cheap parts, which can be dangerous, and ultimately will put some people off riding if they are faulty or not performing as they should!
- waramatt
- Posts: 346
- Joined: Fri Mar 18, 2011 8:52 pm
- Location: Newcastle
Re: Reid Harrier to buy or not?
Postby waramatt » Sat Jun 16, 2012 5:16 pm
Giant TCR Adv 0 Di2
SE Draft Lite SS
Felt Dispatch SS
Surly Cross Check CX
Fuji Nevada 3.0 MTB
Every time I see an adult on a bicycle, I no longer despair for the future of the human race. H G Wells
Return to “Fixed Gear/ Single Speed”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.